![]() Use an Ethernet cable to connect the main router to your MERCUSYS router through their LAN ports (any LAN ports may be used). Go to Network> DHCP Server, switch off DHCP Server, click Save. Go to Wireless > Host Network and configure the SSID (Network name) and Password. This IP address should be outside of the main router’s DHCP range.Įxample: If your DHCP is 192.168.2.100 – 192.168.2.199 then you can set the IP to 192.168.2.11 ![]() ![]() Go to Network > LAN Settings on the side menu, choose Manual and change the LAN IP address of your MERCUSYS N router to an IP address on the same segment of the main router. Note: Though possible, it is not recommended to attempt this process over Wi-Fi. How to log into the web-based interface of the MERCUSYS Wireless Router. Login to the MERCUSYS web interface through the IP address listed on the label on the bottom of your MERCUSYS router (see below link for assistance): The WAN port is not used for this configuration.Ĭonnect your computer to a second LAN port on your MERCUSYS router using an Ethernet cable. The main router will be connected to the MERCUSYS router via LAN port (as seen below). This article will explain how to use your MERCUSYS router as an access point.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |